[1]钱环宇,余永刚,刘 静.不同射击工况下膛内模块装药的热安全性预测[J].火炸药学报,2020,43(2):230-236.[doi:10.14077/j.issn.1007-7812.201904022]
 QIAN Huan-yu,YU Yong-gang,LIU Jing.Thermal Safety Prediction of Modular Charge in the Chamber under Different Firing Conditions[J].,2020,43(2):230-236.[doi:10.14077/j.issn.1007-7812.201904022]
点击复制

不同射击工况下膛内模块装药的热安全性预测

参考文献/References:

[1] 郑朝民, 王琼, 丁黎, 等. 用热爆炸临界温度评价火药装药热安全性的试验方法[J]. 含能材料,2015,23(6):548-552.
ZHENG Chao-min,WANG Qiong,DING Li,et al. Evaluating the thermal safety of propellants by critical temperature of thermal explosion[J]. Chinese Journal of Energetic Materials, 2015, 23(6):548-552.
[2]ASANTE D O, KIM S, CHAE J, et al. CFD cook-off simulation and thermal decomposition of confined high energetic material[J]. Propellants,Explosives,Pyrotechnics, 2015, 40(5):699-705.
[3]AYDEMIR E, ULAS A, SERIN N. Thermal decomposition and ignition of pbxn-110 plastic-bonded explosive[J]. Propellants, Explosives, Pyrotechnics, 2012, 37(3):308-315.
[4]YANG H W, YU Y G, YE R, et al. Cook-off test and numerical simulation of AP/HTPB composite solid propellant[J]. Journal of Loss Prevention in the Process Industries, 2015, 40(2016):1-9.
[5]LI W F, YU Y G, YE R. Effects of charge size on slow cook-off characteristics of AP/HTPB composite propellant in base bleed unit[J]. Propellants, Explosives, Pyrotechnics, 2018, 43(4):404-412.
[6]陈晨, 路桂娥, 江劲勇, 等. 双芳-3发射药热安全性的实验研究[J]. 火炸药学报, 2014, 37(3):70-73.
CHEN Chen,LU Gui-e,JIANG Jin-yong,et al. Experimental research on the thermal safety of SF-3 gun propellant[J]. Chinese Journal of Explosives & Propellants(Huozhayao Xuebao), 2014, 37(3):70-73.
[7]ZHANG J Q, GAO H X, MA H X, et al. Non-isothermal decomposition kinetics, heat capacity, and thermal safety of 2-nitroimino-5-nitro-hexahydro-1,3,5-triazine[J].Propellants, Explosives, Pyrotechnics, 2011, 36(1):28-33.
[8]POURMORTAZAVI S M, HOSSEINI S G, RAHIMI-NASRABADI M, et al. Effect of nitrate content on thermal decomposition of nitrocellulose[J]. Journal of Hazardous Materials, 2009, 162(2/3):1141-1144.
[9]刘静,余永刚. 模块装药快速烤燃特性的数值预测[J]. 含能材料, 2019, 27(5):25-30.
LIU Jing,YU Yong-gang. Numerical prediction of fast cook-off characteristic for modular charges[J]. Chinese Journal of Energetic Materials, 2019, 27(5):25-30.
[10]刘伟, 范爱武, 黄晓明. 多孔介质传热传质理论与应用[M]. 北京:科学出版社, 2006.
[11]陈桂东, 周彦煌. 火炮身管报警温度的确定[J]. 兵工学报, 2008, 29(1):19-22.
CHEN Gui-dong,ZHOU Yan-huang. Methods to ascertain the alert temperature of gun tube[J]. Acta Armamentarii, 2008, 29(1):19-22.
[12]胡荣祖,郭鹏江,宋纪蓉,等. 用非等温DSC估算硝化棉热爆炸的临界温升速率[J].火炸药学报, 2003, 26(2):53-57.
HU Rong-zu,GUO Peng-jiang,SONG Ji-rong,et al. Estimation of the critical increase temperature rate of thermal explosion of nitrocellulose using non-isothermal DSC[J]. Chinese Journal of Explosives & Propellants(Huozhayao Xuebao), 2003, 26(2):53-57.
[13]姚二岗, 胡荣祖, 赵凤起, 等. 用DSC曲线数据估算硝化棉的CnB和表观经验级数自催化分解反应热爆炸临界温升速率[J]. 火炸药学报, 2013, 36(5):72-76.
YAO Er-gang,HU Rong-zu,ZHAO Feng-qi,et al. Esti-mation of the critical rate of temperature rise for thermal explosion of Cnb and apparent empiric-order autocatalytic decomposing reaction of nitrocellulose from DSC curves[J]. Chinese Journal of Explosives & Propellants(Huozhayao Xuebao),2013,36(5): 72-76.
[14]宁斌科, 刘蓉. 硝化棉一级自催化分解反应动力学参数数值模拟[J]. 含能材料, 1999, 7(4):162-165.
NING Bin-ke,LIU Rong. Numerical simulation of kinetic parameters of the first-order autocatalytic decomposition of NC[J]. Chinese Journal of Energetic Materials, 1999, 7(4):162-165.
[15]张明安. 火炮身管工作过程传热模拟[M]. 北京:兵器工业出版社,2016.
[16]刘子如. 含能材料热分析[M]. 北京:国防工业出版社,2008.

相似文献/References:

[1]何卫东,董朝阳.高分子钝感发射药的低温感机理[J].火炸药学报,2007,30(1):9.
[2]张 昊,彭 松,庞爱民,等.NEPE推进剂老化过程中结构与力学性能的关系[J].火炸药学报,2007,30(1):13.
[3]路向辉,曹继平,史爱娟,等.表面处理芳纶纤维在丁羟橡胶中的应用[J].火炸药学报,2007,30(1):21.
[4]李春迎,王 宏,孙 美,等.遥感FTIR光谱技术在固体推进剂羽焰测试中的应用[J].火炸药学报,2007,30(1):28.
[5]杜美娜,罗运军.RDX表面能及其分量的测定[J].火炸药学报,2007,30(1):36.
[6]王国栋,刘玉存.神经网络在炸药晶体密度预测中的应用[J].火炸药学报,2007,30(1):57.
[7]周诚,黄新萍,周彦水,等.FOX-7的晶体结构和热分解特性[J].火炸药学报,2007,30(1):60.
[8]张秋越,孟子晖,肖小兵,等.用分子烙印聚合物吸附溶液中的TNT[J].火炸药学报,2007,30(1):64.
[9]崔建兰,张 漪,曹端林.三羟甲基丙烷三硝酸酯的热分解性能[J].火炸药学报,2007,30(1):71.
[10]李进华,孙兆懿.四氧化二氮胶体饱和蒸气压的测试及分析[J].火炸药学报,2007,30(1):74.

备注/Memo

收稿日期:2019-04-13; 修回日期:2020-01-13
基金项目:国家自然科学基金(No. 51176076)
作者简介:钱环宇(1994-),女,硕士研究生,从事模块装药热安全性研究。E-mail:huanyu_qian@163.com
通信作者:余永刚(1963-),男,教授,博士生导师,从事工程热物理研究。E-mail:yygnjust801@163.com

更新日期/Last Update: 2020-05-13


@Copyright 西安近代化学研究所(中国兵器工业第204研究所)  陕ICP备14002633号-2
地址:西安市18号信箱《火炸药学报》编辑部   联系电话:029-88291297   邮箱:hzyxb@204s.com